How to Hire a Contractor
The most expensive part of a home project is usually the contractor you did not check. The checks are free and take minutes — here they are, in order.
Define the job in writing first
Write down the scope before anyone quotes it: what is being done, what materials, what is included and excluded, and what “finished” looks like. A vague scope produces quotes that cannot be compared — one contractor prices the full job, another prices half of it, and the cheaper number wins for the wrong reason. Photos, measurements, and the brand or grade of materials all belong in the document.
Verify the licence — free, about five minutes
Find your state’s contractor licensing board and search by name or licence number. Confirm the licence is active and check complaints and disciplinary history. There is no single national contractor licence — roughly three-quarters of states require general contractors to hold a state-level licence, and in some states (Texas, for example) there is no statewide general-contractor licence at all, only trade licences. An unlicensed contractor is not automatically a bad worker — but unlicensed work risks a denied homeowner’s insurance claim if it causes a fire or flood, work that fails inspection and must be redone at your cost, and no state board or bond to turn to when things go wrong.
Verify insurance — the licence does not prove it
Ask for a certificate of insurance and confirm it directly with the insurer — a piece of paper from the contractor proves nothing on its own. You want general liability (damage to your property) and workers’ compensation (injury to the crew) both current. If an uninsured worker is hurt on your property, the claim can land on your homeowner’s policy — or on you.
Get three written quotes at identical scope
Three quotes, same written scope, itemised where possible. The comparison is not just the total: it is what is included, what is an allowance (a placeholder number that can balloon), and what is excluded. A quote far below the other two usually excludes something the others include — find out what before you sign, not after the work starts. Our how to read a home improvement quote guide walks through the line items.
Check references — and drive past one
Ask for three recent references and call them: was the job on time, on budget, and clean? Then drive past a completed job if you can. Online reviews help, but a reference you spoke to and a job you saw are worth more than a star count. For roofing and HVAC, ask how the contractor handles the warranty — manufacturer warranties often require certified installation.
Sign a contract — and never pay in full upfront
The contract should state scope, materials (brand and grade), start and finish dates, total price, payment schedule, permits (who pulls them), cleanup, and warranty terms. A typical schedule is a deposit, progress payments tied to milestones, and a final payment on completion — never the full amount before work begins. Get change orders in writing, priced before the work is done, not after. And keep the final payment until the job passes inspection and the punch list is finished.
Questions people ask
What if my state does not license general contractors?
Then the checks shift to trade licences (electrical, plumbing, HVAC) where they exist, plus insurance, references, and a written contract. The absence of a licence requirement makes the other checks more important, not less.
Should the contractor pull the permits, or should I?
The contractor, almost always. A contractor who asks you to pull the permits is often trying to shift liability — and a permit in your name makes you responsible for the inspection outcome.
How much deposit is normal?
A modest deposit tied to materials is normal; full payment upfront is a red flag. State laws often cap deposits — check your state’s rule before you sign.
What is the biggest red flag?
Pressure to sign today, no written contract, no licence or insurance you can verify, and a price far below every other quote. Any one of those is enough to walk away.
Sources (checked November 2026): PermitDeck, ‘How to Check If a Contractor Is Licensed’ (July 30, 2026) — state board lookup; licence active + complaints/disciplinary history; unlicensed-work risks (insurance claim denial, failed inspection, no recourse). LegalClarity, ‘Contractor License Number’ (2026) — roughly three-quarters of states require a state-level licence for general contractors; licence does not prove current insurance; FTC guidance to verify a licence is current and ask for insurance certificates. HomeAdvisor 2025 cost data — roof replacement $5,902–$13,374 (average $9,608); HVAC average about $7,500.